Series of large connections for DIN rails compatible with cables measuring between 6 mm2 and 70 mm2, with a nominal current of up to 192 A.
All connections consist of a spring system designed to eliminate vibrations from the terminals.
Compatible with all types of DIN rail.
The hexagonal head bolts on the 35-mm2 connections allow for particularly high tightening torques.
All connections are protected in accordance with the requirements of standard VBG4.
The earth and feed-through connections measuring between 35 and 70 mm2 are entirely encased, negating the need for end plates.
Insulating material conforms to flammability rating UL 94-VO.
Turned brass/copper conductive bar and galvanised chrome-plated steel tightening clamps for optimal conductivity and resistance.
UL and CSA
UL; CSA
UL，CSA
| 屬性 | 數值 |
|---|---|
| 顏色 | 灰色 |
| 線規格 | 10 → 2 AWG |
| 層數目 | 單層 |
| 系列 | WKN |
| 端接方法 | 螺釘 |
| 電纜 CSA | 35mm2 |
| 額定電壓 | 1 kV |
| 額定電流 | 124A |
| 節距 | 16mm |
| 最高工作溫度 | +120°C |
| 危險區認證 | ATEX |
| 符合標準 | CSA 、 CSA Ex 、 GL 、 VDE |
